Z-150.4LX
Inviato: 29 feb 2020, 20:12
Prodotto dal 2014 circa, evoluzione dello Z-150.4 II dove è stata eliminata tutta la sezione crossover per mantenere il segnale il più pulito possibile ed utlilizzati (a detta Zapco) componenti più selezionati.
Rimpiazzato lo scorso anno dalla serie AP.
Class AB Bridgeable 12V Amplifier
Ultra High-Speed PWM MOSFET Power Supply
Stable into 4-Ohms Bridged or 2-Ohms Stereo Load
Titghtly Regulated from 11.5V to 14.5V
Variable Input Sensitivity for Each Channel
Tiffany Style RCA Signal Input and Output Connectors
4-Way Protection Circuitry (Thermal / Over Current / Speaker Short / DC)
Tested Voltage and THD: 11.5V ~ 15V and Less than 0.05% THD at Rated Power
Operating Voltage: DC10V 15.5V Power Input
Specifications:
Rated Power Output:
RMS Power, 4-Ohms Stereo: 150W x 4CH
RMS Power, 2-Ohms Stereo: 250W x 4CH
RMS Power, 4-Ohms Bridged: 540W x 2CH
Signal-to-Noise Ratio: >90dB
Frequency Response: 10Hz ~ 30KHz (+/-1dB)
THD at RMS Watts: 0.05%
Channel Separation: >50dB
Fuse Rating: Recommended 150A
Input Sensitivity: 200mV~8V (+/-5%)
Dimensions: 7.48" W x 2.46" H x 18.82" L
Rimpiazzato lo scorso anno dalla serie AP.
Class AB Bridgeable 12V Amplifier
Ultra High-Speed PWM MOSFET Power Supply
Stable into 4-Ohms Bridged or 2-Ohms Stereo Load
Titghtly Regulated from 11.5V to 14.5V
Variable Input Sensitivity for Each Channel
Tiffany Style RCA Signal Input and Output Connectors
4-Way Protection Circuitry (Thermal / Over Current / Speaker Short / DC)
Tested Voltage and THD: 11.5V ~ 15V and Less than 0.05% THD at Rated Power
Operating Voltage: DC10V 15.5V Power Input
Specifications:
Rated Power Output:
RMS Power, 4-Ohms Stereo: 150W x 4CH
RMS Power, 2-Ohms Stereo: 250W x 4CH
RMS Power, 4-Ohms Bridged: 540W x 2CH
Signal-to-Noise Ratio: >90dB
Frequency Response: 10Hz ~ 30KHz (+/-1dB)
THD at RMS Watts: 0.05%
Channel Separation: >50dB
Fuse Rating: Recommended 150A
Input Sensitivity: 200mV~8V (+/-5%)
Dimensions: 7.48" W x 2.46" H x 18.82" L